92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM 
info@sieuthivienthong.com
(028) 7300 1535Hỗ trợ kinh doanh
Ms. Linh: 0918 489 013 
Ms. Lê: 0916 514 469
Ms. Tuyết: 0915 762 088
Ms. Hiên: 028-73001535
Ms. Tuyền: 028-7300 1535
Ms. Thảo: 028-3588 6355
Ms. Vân: 0914 801 001
Chăm sóc khách hàng
0916 287 068 EWS 11ax Managed Outdoor Access Point EnGenius EWS850AP
Trang Chủ >>
Thiết bị mạng >> Thiết bị mạng EnGenius >> EWS 11ax Managed Outdoor Access Point EnGenius EWS850AP
Mã số:04104511
EWS 11ax Managed Outdoor Access Point EnGenius EWS850AP
- EWS850AP is the first Wi-Fi 6 outdoor solution of EnGenius. The edge 802.11ax built-in ultra-speed access point with OFDMA and MU-MIMO technology for high-density use on multiple applications.
- Dual concurrent 802.11ax architecture and backward compatible with ac wave2/ac/a/b/g/n client devices.
- 360° Omni-directional antennas to achieve comprehensive coverage for networking client devices under a pervasive environment.
- Compliance with Proprietary 48V PoE Input for flexible installation and implementing remotely reset/reboot Access Point over 100 meters (328 feet).
- Robust housing with IP67 enclosure rated to deploy at extreme weather.
- Systemic and distributed management over EnGenius ezMaster, Skykey controller, and EWS Management switch without licensing or subscription fee.
Specifications
| Technical Specifications | |
| Standard | 802.11ax and ac/a/b/g/n compliance |
| Antenna | SMA Type interfaces 2.4 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas 5 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas |
| Physical Interface | One (1) 10/100/1000/2500 BASE-T RJ-45 Ethernet Ports 4 x RP-SMA Connector Interfaces |
| LED Indicators | Display system and wireless transmission status |
| Power | Maximum Power Consumption |
| Maximum 15.9W | Power Source 802.3af/at Compliance Source Proprietary 48V-54V Active Ethernet (Power Over Ethernet, PoE) |
| Surge Protection | 1KV |
| ESD Protection | Contact: 4KV Air: 8KV |
| Mounting | Pole Mount Wall Mount |
| Wireless & Radio Specifications | |
| Access Point Type | Outdoor, IP67, dual radios concurrent, 5 GHz 802.11ax 2×2 MU-MIMO is backwards compatible with 802.11 ac/a/n mode, 2.4 GHz 802.11 ax 2×2 MU-MIMO is backwards compatible with 802.11 b/g/n. |
| SU-MIMO | Two(2) spatial streams SU-MIMO for 2.4 GHz and two(2) spatial streams SU-MIMO for 5 GHz up to a totally 1,774 Mbps wireless data rate to a single 11ax wireless client device under both 2.4 GHz and 5 GHz radio. |
| MU-MIMO | Two(2) spatial streams multi-user (MU)-MIMO for up to 1201 Mbps wire-less data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 5 GHz simultaneously. Two(2) spatial streams multi-user (MU)-MIMO for up to 574 Mbps wireless data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 2.4 GHz simultaneously. |
| Frequency Radio | 2.4 GHz: 2400 MHz ~ 2482 MHz 5 GHz: 5150 MHz~5250 MHz, 5250 MHz~5350 MHz, 5470~5725 MHz, 5725 MHz~5850 MHz Support radios and channels will be varied in the configured regulatory domain. |
| Supported Radio Technology | 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT)-HE 20/40/80 MHz 802.11ac supports very high throughput (VHT)-VHT 20/40/80 MHz 802.11n supports high throughput (HT)-HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio-VHT40 MHz (256-QAM) 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU |
| Supported Modulation Type | 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
| Transmit Power (Maximum Value) | 2.4 GHz: 23 dBm 5 GHz: 25 dBm Maximum power is limited by regulatory domain |
| MU-MIMO | MU-MIMO allows multiple spatial streams to be allocated to different clients simultaneously on both download and upload sides. |
| OFDMA | Orthogonal frequency-division multiple access (OFDMA) allows a single transmission to be split by frequency within a channel. |
| Tx Beamforming (TxBF) | Increasing signal reliability and transmitting distance. |
| BSS Coloring | BSS coloring marks different colors on each data which will allow client devices to stop receiving a frame and return to sleep mode as soon as they recognize these frames are not of interest to them. |
| Target Wake Time (TWT) | The target wake time feature lets your devices to keep a radio receiver sleeping and wake it up as needed to receive periodic transmissions from an access point. The result is significant power-saving for battery-powered devices. |
| Supported data rates (Mbps) | 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2) 802.11ax: 2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS=1 to 2) 5 GHz: 18 to 1201 (MCS0 to MCS11, NSS=1 to 2) |
| Management Features | |
| ACK timeout (Distance Control) | Set the ACK timeout to assure the proper distance to deliver wireless signal properly |
| Site Survey | Scan signal level of an environment to provide parameters for performing Auto Transmit power and auto channel |
| Auto Transmit Power | Automatically adjust the power level |
| Auto Channel | Automatically assign a clear channel to perform RF transmission under a pervasive environment. |
| Fast Roaming (802.11k) | Collect the parameters of neighborhood Access Points to find the optimal AP. Fast Roaming (802.11v) Cognize the signal strength of client devices under each to steer these client devices to one of Access Points if the signal level is less than the default value of AP systems. |
| Band Steering | Steer client devices to a proper frequency band for getting more bandwidth and speed under an Access Point |
| RSSI Threshold | Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality |
| Multiple SSIDs | BSSID support Support 8 SSIDs on both 2.4 GHz and 5 GHz bands. |
| Guest Network | Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability. The function will only available on stand-alone mode |
| VLAN Tag | Independent VLAN settings can be enable or disable. Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID) |
| VLAN Pass-through | Broadcast VLAN-tag packets to find the destination and deliver packets over the defined path. The functions allow network topology scalable and flexible. |
| VLAN Per SSID | Integrate VLAN ID with a SSID interface to forward packets over the defined path. The functions isolate client devices to get more security. |
| Management VLAN | The feature is enabled with the specified VLAN ID, the device will only allow management access with the same specified VLAN ID from a remote location by using protocols such as telnet, SSH, SNMP, Syslog, etc. |
| Traffic Shaping | Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point |
| E-Mail Alert | Provides a network monitoring tool for administrators to stay informed of the configuration change |
| Save Configuration as Users Default | Save the customized configuration as the default value for different customer demands. |
| Wi-Fi Scheduler | Perform a regular reboot on access point at the assigned schedule Perform it to enable or disable 2.4GHz or 5GHz interface from a period of time. |
| CLI | CLI Supported |
| RADIUS Accounting | Help operators to offload 3G to Wi-Fi seamlessly |
| Wireless Clients list | Provide the list to display the real status of wireless client devices on this Access Point. |
| Hotspot 2.0 | This function will allow client devices to discover wireless Access Point under an environment and to automatically exchange data for getting authorization on accessing the Internet when roaming between Access Points |
| Environmental & Physical | |
| Temperature Range | Operating: -20°C~60°C (-4°F~140°F) Storage: -30°C~80°C (-22°F~176°F) |
| Humidity (non-condensing) | Operating: 0%～90% typical Storage: 0%～90% typical |
| Environment Protection Level | IP67 |
- Bảo hành: 24 tháng.
Giá: Vui lòng gọi
Sản phẩm liên quan
| Tel: | (028) 7300 1535 |
| Showroom: | 92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM |
| Website: | www.sieuthivienthong.com |
| Email: | info@sieuthivienthong.com |
Quảng cáo
Giải pháp kỹ thuật
Thống kê truy cập
115.456.160
