Photoelectric Beam Sensor Outdoor TAKEX PB-IN-100AT(R)(E)

Trang Chủ >> Báo cháy-Báo trộm >> Báo động TAKEX >> Photoelectric Beam Sensor Outdoor TAKEX PB-IN-100AT(R)(E)
Mã số:13302050
Photoelectric Beam Sensor Outdoor TAKEX PB-IN-100AT(R)(E)

Photoelectric Beam Sensor Outdoor TAKEX PB-IN-100AT(R)(E)

- Four Frequency Selection: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.

- Dual Response time system 

   + Two individual response times are provided for separate adjustment of AND/OR gates.

   + This enables detection of intruders, but minimizes false alarms.

- Beam Transmission strength selection: 2 levels of beam transmission strength which can be set to suit the protection distance.

- Auto-Gain Lock: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.

- Easy Beam Alignment:

   + Audible signal for alignment [Utility model] ... An alignment tone aids in quick set-up beams. The tone becomes maximum at peak of beam level.

   + Beam selector ... Upper and lower beam alignment can be adjusted without using a shading plate.

   + Sensitivity attenuation LED ... Lights when beam level is attenuated, which shows low sensitivity.

   + Monitor jack output.

- Programmed AGC: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

- Environmental module built-in: Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.

- Protection Against Frost/Dew: As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

Thông số kỹ thuật

Detection system Near infrared beam interruption system (TR,-RE 4 beams simultaneous interruption or upper 2 beams interruption or lower 2 beams interruption)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 100m (330') or less
Max. arrival distance Tenfold 1000m (3300')
Response time Dual response time system 35-500msec. (AND gated) 100,200,300,500msec.(OR gated)
Power supply 12V to 30V DC(non-polarity)
Current consumption 85mA or less at protection(Max. 120mA or less)
Alarm output Dry contact relay output 1c
Reset:Interruption time+off-delay(approx. 1.5 sec.)
Contact capacity:30V AC/DC, 1A or less
Environmental output Dry contact relay:1c
Contact operation:Output when weather condition gets worse
Contact capacity:30V AC/DC, 1A or less
Tamper output Dry contact relay:1b
Contact operation:Output when transmitter or receiver cover is detached
Contact capacity:30V AC/DC, 0.1A or less
Alarm LED Red LED(receiver)lights when an alarm is initiated
Sensitivity attenuation LED Red LED(receiver)lights when beam reception is attenuated
Functions Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Beam selector, Programmed AGC. Auto-gain lock function, Monitor jack.
Beam adjustment Horizontal: +/-90°, Vertical: +/-10°
Ambient temperature range -35C to + 66C (-31F to + 151F)
Mounting position Outdoor
Wiring Terminals
Weight Transmitter:1200g(42 oz)
Receiver :1300g(45.5oz)
Appearance PC resin(wine red)

- Xuất xứ: Nhật Bản.

- Bảo hành: 12 tháng.

Giá: 10.452.000 VND (Đã bao gồm VAT)

Số lượng :

Thêm vào giỏ Mua ngay


Chia se tren Facebook
Sản phẩm liên quan

Tel:(028) 7300 1535
Showroom:92K Nguyễn Thái Sơn - Phường 3 - Q.Gò Vấp - Tp.HCM
Website:www.sieuthivienthong.com
Email:info@sieuthivienthong.com